2004-02: The half built rack

2004: The schema for the rack

2005-05-04: Here's the Pedal Power 2 underneath the Pedaltrain

2005-05-05: Underside of the board

2005-06: Trying to figure out how to rebuild the rack for more versatility

2005-10: Discovered the Switchblade. Thank goodness I didn't build this!

2006-01-07: Gone back to a rack setup - see the photo collection called

2006-01-25: A side view of the Pedal Power underneath the board

2006-01-25: Another side view of the Pedal Power underneath the board

2006-01-25: The Pedal Power clears the ground by about 10mm

2006-01: Back of the rack

2006-01: Back of the rack

2006-01: Back of the rack

2006-01: Effects rack - drawer extended

2006-01: New effects rack

2006-01: Pedal drawer

2006-07: Effects Rack and Amp Case

2006-10-07: Close-up of the FX-1

2006-10-07: Got the Pedal Power 2 and the Pedal Power AC under there, with the BS-2 too

2006-10-07: Got the Pedal Power 2 and the Pedal Power AC under there, with the BS-2 too

2006-10-07: Got the Pedal Power 2 and the Pedal Power AC under there, with the BS-2 too

2006-10-07: Showing the notches cut to accomodate the power connectors on the supplies

2006-10-07: Signal flow is Guitar > BS-2 > Wah > RC Booster > Switchblade

2006-10-07: The BS-2 fits neatly under the top edge of the Pedaltrain board

2006-10-07: The BS-2 fits neatly under the top edge of the Pedaltrain board

2006-10-07: The reorganised floor board

2006-10: Effects rack with the RSP-550 and MPX-1 added

2006-10: Pedal Drawer